The linear guide system with linear circulating ball bearing unit includes linear ball bearing, carriage and guide rail. They contribute to a large distance between support points, can adjust the gap and have a standard quality grade G3.
Fully padded shoes move on one or both sides of the guide rail. Although the size is very small, they have high load capacity. When the shoes are bolted to the carriage, they form a four row linear ball bearing and guide rail assembly together with the guide rail. The scrapers on the front and longitudinal sides form a gap seal with the guide rail to seal the slippers on all sides. Linear circulating ball bearing units can be re lubricated.
The bracket consists of a male alumina base and two linear circulating ball bearing units. In order to install on adjacent structures, the carriage has a T-groove. The clearance can be adjusted by three screws on the side of the carriage; The screw is pressed on the back of the shoe.
The guide rail can have raceways on one or both sides of the guide rail. They are made of hardened steel and ground on all sides.
